Removes carbon from piston ring grooves
Adjustable for pistons 50mm/2” to 125mm/5" diameter
Will not come out of groove
Cutter pressure is controlled for an even cut
Rigid frame
Includes 3 cutters with the following size blades
Cutter No. 1: 1/16", 3/16", 5/32", 1/8", 3/32"
Cutter No. 2: 2mm, 2.5mm, 3mm, 4mm, 4.5mm, 1/4"
Cutter No. 3: 1.2mm, 1.5mm, 1.8mm, 2.8mm, 5mm, 5.5mm
648450
For deglazing engine cylinders 50mm/2" to 175mm/7" diameter
Durable flex shaft
Knurled wheel adjusts spring pressure of stones against cylinder bore
Set screw and adjustable collar allow setting hone to 2 different maximum
diameters for easier handling
Hone features 3 replaceable 100mm/4" long #220 grit stones
BGT0005
Package of 3 replacement stones and cotter pins #220 grit
BGT0004
For removing and installing hydraulic lifters from lifter bed
When button is pressed, special tip expands inside lifter and locks for
positive engagement
305mm/12” Length
648459
On the car servicing
Locks into place in the compressed position
Allows hands free for removal of valve keepers
648690
For removing valve springs without removing the cylinder head
Jaws are different lengths to allow positive engagement with valve spring
coils
Provided “T” handle also has hex surface for use with socket
or end wrench
648432
For hand lapping valves and valve seats. Hardwood handles
225mm/9" tool with 28mm/1 1/8" and 34.6mm/1 3/8" cups
200mm/8" tool with 15mm/5/8" and 4.7mm/3/16" cups
Synthetic rubber cups are resistant to chemical agents
Non slip cups are groove locked to handle
648448
For easy removal of metal freeze plugs up to 50mm/2" diameter
from engine block
648452
For checking bearing clearances during engine assembly
Includes green tape measuring .001" to .003" and red tape measuring
.002" to .006"
648441
(MADE IN USA)
For removing radiator hoses and draining radiators
Push-pull cutting tool for slitting stuck-on radiator hoses
Two different design sockets are provided for loosening petcock valves
and drain plugs
648456
For rotating engine by hand
Lever arm allows easy rotation of the crankshaft
Can be used from under the vehicle
Comfort grip handle
648455
Adaptor fits through clutch plate and engages pilot bushing or bearing
Tapered clutch plate adaptor (cone) aligns clutch plates properly
Includes centering shaft
Tapered clutch plate adaptor with 1 1/4" maximum diameter
8 Two stepped pilot bearing adaptors 15.8/12mm, 17/15mm, 0.787/0.749",
0.874/0.812", 0.590/0.561", 0.624/0.614", 0.718/0.668",
1.18/0.984" adaptors in a blow-mold case with hanger hole
648437
