Ignition File
For dressing ignition and voltage regulator points, removing carbon,
etc
Flexible, thin blade with cutting surface on both sides
648419
14mm Back-Tap Spark Plug Thread Repair Tool
The Back-Tap 's patented collapsible design allows it to be placed through the spark plug hole and into the chamber.
A mandrel is then drawn back, expanding the tool 's threaded area and threading into the clean threads at the bottom of the spark plug hole.
The Back-tap repairs the damaged threads as it is drawn up through the spark plug hole, bringing debris and metal filings with it
640811H
NO Need to pull cylinder head!
NO Metal fillings in engine!
NO Coil insert needed!
For pulling boot off spark plug
Plastic puller insulates hands from electrical shock and helps to prevent
burns
Serrated jaw tips grasp spark plug boot firmly
648426
For safe removal of spark plug wire boots without wire damage
Concave, nylon tipped jaws grasp boots firmly
648427
Rethreads damaged 14mm spark plug holes in aluminium heads
Includes tap and 4 inserts with the following reach 3/8”, 7/16”,
5/8”, 13/16”
Inserts not sold separately
648421
For repairing damaged or dirty threads in spark plug holes
14mm and 18mm threads
Rubber “O” ring holds tool firmly in place in 13/16” socket
when in use
648422
Measures clearances from 0.002 to 0.025” (0.051 to 0.635 mm)
Gauge includes 9 steel blades and a 50mm/2” steel ruler
Includes 0.002, 0.003, 0.004, 0.005, 0.006, 0.008, 0.020, 0.022, 0.025
Metric and Imperial measurements on blades
648514
(MADE IN USA)
Measures valve tappet clearances to 0.026”
Angled tip design for easy access to valves for clearance checks
Include 0.009, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.026
Metric and Imperial measurements on blades
648515
(MADE IN USA)
Measures clearances to 0.025”
Include 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008,
0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018,
0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025
Metric and Imperial measurements on blades
648517
(MADE IN USA)
Gauge set contains flat and wire loop blades, non-magnetic brass blades
and spark plug gap adjusting tool
Steel blades include 0.010, 0.012, 0.015, 0.016, 0.017, 0.018, 0.019,
0.020, 0.022, 0.024, 0.025, 0.026
Brass blades include 0.006, 0.008, 0.010, 0.012, 0.014, 0.016
Wire loop blades include 0.025, 0.030, 0.034, 0.035, 0.040, 0.045
Flat blades have metric and imperial measurements on blades
648518
(MADE IN USA)
Adjusts air gap clearances on some types of electronic ignition systems
Gauge set contains non-magnetic Brass Blades
Includes 0.006, 0.008, 0.010, 0.012, 0.014, 0.016
648519
(MADE IN USA)
Smaller blade size for measuring clearances where access is difficult
Include 0.010, 0.012, 0.013, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020,
0.022, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035
648520
(MADE IN USA)
Measures and adjusts spark plug gaps
Includes 0.025, 0.030, 0.034, 0.035, 0.040, 0.045
Tool includes 2 electrode adjusting tools
648522
