500cc/16oz Oil Can
Easy to use thumb lever
125mm/5" Flexible braided hose.
Powder coat finish
Pump has two ball valves for larger delivery volume
648751
Super absorbent, Reusable, lint free & tear resistant Power Towel
Ideal for cleaning up spills, dusting delicate surfaces
So many uses, perfect for the home, garage, car or workplace
Each towel comes in its own storage container
SMS0625
12 in 1 Multi Function Tool & Utility Knife Set
Utility Knife
Folding utility knife for safety and storage
One side operates a standard utility knife, the other operates a straight blade all in one solid single handle
Easy push button for open-lock and close-lock action
Quick-release button for blade replacement
Overall length: 00mm closed, 00mm open
12 in 1 Multi Function Tool
Tool features: Needle Nose Plier, Stripper, Wire Cutter, Large Blade, Small Blade, Flat Screwdriver, Hook remover,double sided file, Serrated Knife, Phillips Screwdriver, Bottle Opener, Can Opener
CMS0902
13 in 1 Multi Function Tool
• Includes Long Nose Pliers, Wire Cutter,
Large Knife, Phillips Screwdriver,
Slotted Screwdrivers (Small, Medium, large),
Can Opener, Bottle Opener, Serrated Blade,
Small Blade, Double Cut File,
Single Cut File and storage pouch
940751H
3pc Inspection Tool Set
Includes Round Magnetic parts dish 100mm Ø
5lb Magnetic pick-up tool - Telescopic 165mm to 850mm
Inspection Mirror - Telescopic 165mm to 480mm
AGS0065
For flaring commonly used sizes and types of tubing
Hinged, Wing Nut design
Ductile iron yoke, chrome plated die block and hardened cone
Tool produces a 45° flare
Diameters include 3/16”, 1/4”, 5/16”, 3/8”,
1/2”
940648
145mm/5
3/4”
Holds small parts and tools
Durable stainless steel with rubber covered magnet to prevent scratching
648356
Waterproof Nylon material cover ideal
when working on a car to protect seats upholstery
Fits over most vehicle headrests
Screen Printed with Powerbuilt Racing Team Logo
AH0115
For temporarily sealing off vacuum lines, fuel lines and other hoses
with a positive, hands off grip
Pincher tool uses wing nut to compress jaw and apply pressure between
jaw and tool body
25mm/1” opening
Two per package
648526
For removing broken studs, screws, bolts, etc.
Left hand spiral blade design grips screw when turned into hole drilled
to specified size
Includes 3/16”-1/4”, 1/4”-5/16”, 5/16”-7/16”,
7/16”-9/16”, 9/16”-3/4”, 3/4”-1” in
a plastic storage tray
648511
Can be reversed to tighten screws or nuts
Chrome plated and black oxide finish
Vinyl storage pouch
Bits include Phillips #2, #3, Slotted 5/16”, 3/8”
648002
For quickly releasing door panel and upholstery clips
Reduces damage to panels and loss of clips
Chrome plated shaft, comfort grip handle
648544
5 Gallon Parts Washer with Power Switch
Operating capacity: 5 Gallon/18.92 Liters
Pump capacity: 1.056 Gal per minute/4 Ll per minute
Min/Max Fluid capacity: 3.96Gal to 5Gal /15L to 18.92L
For use with water soluble cleaners only
Flexible cleaning spout
Large filter & cap included
Drain basket to catch debris
Twist off cap for easy drainage
Compact and durable case
UL Certified power switch
SAA approved
Net weight: 6.8Kgs
Tools & brushes not included
641355H
Multiple tips simply screw into handle
Durable hardened steel picks and hook
Knurled steel non-slip 125mm handle has removable end cap to store tips when not in use
Includes 85mm long Tips in Straight, 90’ Degree, Hook, Combination and 390mm Telescopic Magnetic Pick Up
647084
Extended Flexible Extension with Magnetic Bit Holder
Attaches to power drills or 1/4” female Hex hand tools
Flexible driver extension is ideal in hard to reach areas
Flexible outer shaft is designed to be held at various angles and can flex up to approximately 110 degrees
Includes 320mm Flexible Extension with magnetic & locking quick release bit holder
EYT0027
2pc Quick Release Driver Extension & 9pc Bit Set
Attaches to power drills or 1/4” female Hex hand tools
Driver extensions are ideal in hard to reach areas
Includes 150mm & 305mm Extensions
Magnetic Bit Holder
Bits (25mm) Phillips #1, #2(2), #3
Slotted 3/16”, 1/4”
Pozi #2
Robertson S2
EYT0028
4pc Metric Quick Release Adaptor Set
Ideal for Reversible Gear Spanners allowing additional use with Sockets and Bits
Includes Bit Adaptor to work with 10mm Gear Spanner
1/4” Dr Adaptor to work with 10mm Gear Spanner
3/8” Dr Adaptor to work with 13mm Gear Spanner
1/2” Dr Adaptor to work with 19mm Gear Spanner
641132H
Spanner, Socket & bit not included.
Auto-Stop Tape Measure
The auto-lock feature enables you to retract the exact amount of tape at the push of the button
The automatic locking system means the tape will only retract when you press the button
Ergonomic design and comfortable grip of the casing means that is easily fits in the hand
Tough tempered steel blade, coated for lasting performance
Tape features metric markings only with easy to read red 100mm markings
Features convenient handle loop
8M x 25mm Metric - TD3421
8M/26ft x 25mm/1" Combination - TD3422H
150mm/6” Digital Vernier Caliper
Measures inside, outside and depth dimensions
Measures 0-150mm/6” with up to 0.02mm precision
Easy to read LCD display with large screen
Stainless steel construction
Battery included
Firmly packaged in a sturdy plastic case with foam padding shaped to fit
TD2950
